[libre-riscv-dev] barrel processor as I/O and DMA controller
programmerjake at gmail.com
Wed Apr 10 18:31:21 BST 2019
also, the current design has 5 harts, so 1GHz would mean 200Mips per core,
assuming no stalling.
On Wed, Apr 10, 2019, 10:29 Jacob Lifshay <programmerjake at gmail.com> wrote:
> Note that I don't think it would be particularly low power at 1GHz, so we
> will want to run it at a lower clock rate most of the time.
> On Wed, Apr 10, 2019, 10:27 Luke Kenneth Casson Leighton <lkcl at lkcl.net>
>> On Wed, Apr 10, 2019 at 5:51 PM Jacob Lifshay <programmerjake at gmail.com>
>> > I'd expect it to be able to get to 1GHz or so.
>> fantastic. so, assuming say 4 time-slices, that's 250mhz per
>> time-slice, that would leave 5 instructions per clock cycle with which
>> to do data transfers @ say 50mhz.
>> if that is achievable it would mean that we could do e.g. eMMC in
>> libre-riscv-dev mailing list
>> libre-riscv-dev at lists.libre-riscv.org
More information about the libre-riscv-dev