[Libre-soc-bugs] [Bug 519] Get output from ulx3s serial port to show up in minicom

[bugzilla-daemon at libre-soc.org]

https://bugs.libre-soc.org/show_bug.cgi?id=519

--- Comment #10 from Luke Kenneth Casson Leighton <lkcl at lkcl.net> ---

> Ok committed and pushed. Next question before we can close this bug. Is
> running
> `./versa_ecp5.py --load` supposed to show output in the minicom terminal?

if everything is wired up correctly yes.

a good test is to run picorv32 litex.  ask  on the #litex freenode channel how
to do that.

-- 
You are receiving this mail because:
You are on the CC list for the bug.