[Libre-soc-dev] daily kan-ban update 19mar2021

Tobias Platen libre-soc at platen-software.de
Fri Mar 19 19:36:29 GMT 2021

On Fri, 19 Mar 2021 19:11:26 +0000
Luke Kenneth Casson Leighton <lkcl at lkcl.net> wrote:

I cloned the repository again (using git clone ssh://gitolite3@git.libre-riscv.org:922/soc.git)
then applied my last git diff. I assume that this is the correct method.

I'm currently reading PowerISA_public.v3.0B.pdf, I don't expect any more commits today.

> On Fri, Mar 19, 2021 at 7:03 PM Tobias Platen
> <libre-soc at platen-software.de> wrote:
> >
> > today: testcase for _get_pgtable_addr, I've found that the the address
> > calculated by _get_pgtable_addr is wrong. It returns 0x4000000, but the
> > RADIX_SECOND_LEVEL is at 0x40000 in the test I used. I tried to push
> > my changes but I got the following error.
> yes, you'll need to check the following (do keep up-to-date on the
> mailing list posts)
> http://lists.libre-soc.org/pipermail/libre-soc-dev/2021-March/002187.html
> can you please check that you have the correct git master branch for soc.
> there should be no problems doing "git pull" for example.
> once you've confirmed that i can re-enable write access.
> l.
> _______________________________________________
> Libre-soc-dev mailing list
> Libre-soc-dev at lists.libre-soc.org
> http://lists.libre-soc.org/mailman/listinfo/libre-soc-dev

Tobias Platen <libre-soc[at]platen-software[dot]de>

More information about the Libre-soc-dev mailing list