[Libre-soc-dev] daily kan-ban update 30apr2022

lkcl luke.leighton at gmail.com
Sat Apr 30 17:20:22 BST 2022


sorry still sorting out email, forced to top post.
remember check boot compile address of binary
must be same as reset address. 0xff000000

https://git.libre-soc.org/?p=ls2.git;a=blob;f=hello_world/Makefile;hb=HEAD

also check clk_freq.  you cannot exceed nextpnr-ecp5 max freq. or you can try but do not expect it to be guaranteed.  you can usually go over by about 10%.

but if max freq exceeded bitstream is NOT packed, check README on how to build it manually and run upload openocd manually.

l.


On April 30, 2022 4:23:26 PM GMT+01:00, Tobias Platen <libre-soc at platen-software.de> wrote:
>today: trying to get any uart output on the orangecrab using ls2 and
>hello_world. The blinky is working, everything else is not yet.
>
>
>_______________________________________________
>Libre-soc-dev mailing list
>Libre-soc-dev at lists.libre-soc.org
>http://lists.libre-soc.org/mailman/listinfo/libre-soc-dev



More information about the Libre-soc-dev mailing list