[Libre-soc-dev] Questions about the logos.

Luke Kenneth Casson Leighton lkcl at lkcl.net
Wed Jun 16 13:25:06 BST 2021


ngggggh ok :) middle of meeting gimme 1hr

On 6/15/21, Jean-Paul Chaput <Jean-Paul.Chaput at lip6.fr> wrote:
> On Tue, 2021-06-15 at 12:43 +0100, Luke Kenneth Casson Leighton wrote:
>> ok all 3 done, i did put the Sorbonne one at 50 wide, it looked rubbish,
>> instead i made it 50 *high*.  it can then still fit along the bottom
>> edge,
>> in the left corner, i presume.
>>
>> the other two can go along the left edge, again close to the left corner.
>>
>> Staf i would only recommend putting logos in one corner because if
>> there are several it may be either symmetrical by mistake, or under
>> the microscope they do not look in all corners, see the first one,
>> and go "oh, that must be the only orientation logo".
>
>   Finally to summarize, I will put the logo(s) in the triangular
>   corner. And either I put one logo (Chip4Makers) of 50x50 um
>   or all three logos of 25x25 um.
>
>   For the Sorbonne University logo, just keep the icon, suppress
>   the text so it can be nicely squared.
>
> --
>
>       .-.     J e a n - P a u l   C h a p u t  /  Administrateur Systeme
>       /v\     Jean-Paul.Chaput at lip6.fr
>     /(___)\   work: (33) 01.44.27.53.99
>      ^^ ^^    cell:      06.66.25.35.55   home: 09.65.29.83.38
>
>     U P M C   Universite Pierre & Marie Curie
>     L I P 6   Laboratoire d'Informatique de Paris VI
>     S o C     System On Chip
>



More information about the Libre-soc-dev mailing list