[Libre-soc-dev] Port flexlib to skywater pdk 130nm

[Luke Kenneth Casson Leighton]

On 12/5/20, Cole Poirier <colepoirier at gmail.com> wrote:
> I’d like to attempt to port Staf’s flexlib to the Skywater pdk 130nm gds
> design rules. Is this eligible for funding from nlnet?

if it is limited in scope to a maximum of 1 week, and around EUR 500,
and, critically, you in no way ask questions that you expect either
Staf or JP to answer (because they absolutely cannot), nor post them
where they could be distracted, *and* you also do not distract me from
helping them to do the core for the 180nm ASIC, then go for it.

you should probably start from one of the much smaller examples such
as the am2901 or adder because the turnaround time will be extremely
fast.

bottom line, do not deluge the list with a barrage of 5 to 10
questions per email: this one you need to tackle almost entirely on
your own and/or by going out to external resources.

> Can I create a bug
> report for this?

sure.

l.