[Libre-soc-bugs] [Bug 951] Standard Cell based SRAM for ethmac
bugzilla-daemon at libre-soc.org
bugzilla-daemon at libre-soc.org
Fri Oct 14 10:00:09 BST 2022
https://bugs.libre-soc.org/show_bug.cgi?id=951
--- Comment #1 from Jean-Paul Chaput <Jean-Paul.Chaput at lip6.fr> ---
Evaluation results could be rebuild with:
* coriolis commit #d294a770
* alliance-check-toolkit commit #1049f10
Provisional results
~~~~~~~~~~~~~~~~~~~
.. note:: All length are in micro-meters.
+--------------+-----------------------------+-----------------------------+
| Kind | Generator | Yosys |
+==============+=============================+=============================+
| # Gates | 23209 (-25.4%) | 32121 |
+--------------+-----------------------------+-----------------------------+
| 1 Fold |
+--------------+-----------------------------+-----------------------------+
| Area | 7182 x 330 (-5.5%) | 7380 x 340 |
+--------------+-----------------------------+-----------------------------+
| Wirelength | 1841036 (-4.3%) | 1924153 |
+--------------+-----------------------------+-----------------------------+
| 2 Fold |
+--------------+-----------------------------+-----------------------------+
| Area | 3599 x 660 (-5.3%) | 3690 x 680 |
+--------------+-----------------------------+-----------------------------+
| Wirelength | 1670455 (-6.3%) | 1782558 |
+--------------+-----------------------------+-----------------------------+
| 4 Fold |
+--------------+-----------------------------+-----------------------------+
| Area | 1812 x 1320 (-4.6%) | 1900 x 1320 |
+--------------+-----------------------------+-----------------------------+
| Wirelength | 1699810 (-1.5%) | 1726436 |
+--------------+-----------------------------+-----------------------------+
Conclusions that we can draw from those results are :
1. The generator version uses subtantially less gates than the Yosys one.
As the both SRAM uses the exact same number of SFFs, the difference is
only due to the decoder for the control of input and output muxes.
2. Notwithanding having less gates the generator version uses similar areas,
which means that we use fewer but significantly *bigger* cells.
3. The FlexLib library supplied for SkyWater 130nm do not contains all
SxLib one, effectively restricting our choices.
In particular, to build the output multiplexer we only have mx2 and
mx3 cells, which are large. The density of the SRAM could be much
increased if we did have nmx2 and nmx3. We could also try to synthesise
the tree using nandX and norX but we are short of time.
Furthermore for the output multiplexers, as it is a controlled case,
we may also uses three-state drivers cells (which have not been
ported either).
.. note:: Cell width in the SkyWater 130 port of FlexLib:
============== =====
Cell Width
============== =====
mx2_x2 7
mx3_x2 11
nand2_x0 2
nand3_x0 3
nand4_x0 4
nor2_x0 2
============== =====
1. mx2_x2 + mx3_x2 = 18
2. 9 * nand2_x0 = 18
3. 4 * nand3_x0 + nand4_x0 = 16
4. 6 * nand2_x0 + nor2_x0 = 14
--
You are receiving this mail because:
You are on the CC list for the bug.
More information about the libre-soc-bugs
mailing list