[Libre-soc-bugs] [Bug 526] create dry-run 180nm GDS-II files for IMEC

[bugzilla-daemon at libre-soc.org]

https://bugs.libre-soc.org/show_bug.cgi?id=526

--- Comment #52 from Luke Kenneth Casson Leighton <lkcl at lkcl.net> ---
(In reply to Jean-Paul.Chaput from comment #51)

>   I'm now ready to attack that part. DRC is OK, I am looking into JSON.


>   Don't give too much importance to the final results, I am using Staf
>   FlexLib which has 17 METAL2 tracks instead of 10 for the nsxlib
>   version. So I expect to route with much less problems...

ok - can you add that to alliance-check-toolkit, and set up an example?
(is there a Phantom version of FlexLib that's publicly available? i was
under the impression that there would be!)

i'd very much prefer that we're "tracking" what you're doing (right up
to the point where the "real" (NDA'd) version of FlexLib is used) and
have full public replicability.

>     What matters here is that the flow by itself works (reading the
>   netlist and the positions of the I/O pads).

at this stage, i take it.  ok.

-- 
You are receiving this mail because:
You are on the CC list for the bug.