[Libre-soc-bugs] [Bug 401] Convert Memory Architecture diagram from hand-drawn to editable SVG

[bugzilla-daemon at libre-soc.org]

https://bugs.libre-soc.org/show_bug.cgi?id=401

--- Comment #5 from Luke Kenneth Casson Leighton <lkcl at lkcl.net> ---
(In reply to Cole Poirier from comment #2)
> (In reply to Luke Kenneth Casson Leighton from comment #1)
> > agreed.  however needs the MoU signed first before rfps can be submitted.
> > budget *can* be assigned, would say EUR 150 be good?
> 
> Ah, no problem, understood. EUR 150 seems like much too much for this single
> diagram. It took me about 2 hours, having never used inkscape before, to do
> what I will attach here.

except i know it is a detailed diagram and will take some time.

> If you can please add the parts that are missing
> from the original hand-drawn diagram?

timeconsuming.  and honestly i don't like using diagram editors.  they annoy
me.

> I would have done them myself, however
> due to the resolution of the image it was very difficult to make out what I
> should draw.

the names of the green bits are missing.  these show where "boxes" should be
created that then have arrows coming in and out.

the 2x2 crossbars are also missing.

the arrows are important as they show dataflow (data buses)

without the dataflow the diagram is not useful as it is missing how to connect
the HDL together.

-- 
You are receiving this mail because:
You are on the CC list for the bug.