[Libre-soc-dev] Coriolis 2 - Tutorials and check

[Santhosh Kumar V V .]

Sir, I am trying to do things as instructed, in my file it has

#!/usr/bin/env python3

It does not say python or python2 is this an issue in the file?

On Wed, Aug 10, 2022 at 9:17 PM Luke Kenneth Casson Leighton via
Libre-soc-dev <libre-soc-dev at lists.libre-soc.org> wrote:

> On Wednesday, August 10, 2022, Jean-Paul Chaput via Libre-soc-dev <
> libre-soc-dev at lists.libre-soc.org> wrote:
>
> >   Hello,
> >
> >   What's wrong here is that you have a Coriolis2 version build over
> >   Python 2.7 (as the path clearly shows), but most likely, you try
> >   to run the script with a Python 3 interpreter (hence the error
> >   due to the change of syntax of the print function).
>
> Hm, I always put "python2" or "python3" in scripts in order
> to make sure that doesn't happen. if however you look
> at this:
>
> >>   File "/home/santhosh/alliance-check-toolkit/bin/yosys.py"
>
> At the top it says "usr/bin/env python" not "usr/bin/env python2"
>
> what *that* in turn leads us to check is where /usr/bin/python
> points to, and I bet it is a symlink to python3.
>
> Change it to python2 and all should be good.
>
> l.
>
> --
> ---
> crowd-funded eco-conscious hardware: https://www.crowdsupply.com/eoma68
> _______________________________________________
> Libre-soc-dev mailing list
> Libre-soc-dev at lists.libre-soc.org
> http://lists.libre-soc.org/mailman/listinfo/libre-soc-dev
>