[Libre-soc-bugs] [Bug 517] Define JTAG pins and set up with litex for ulx3s85f

bugzilla-daemon at libre-soc.org bugzilla-daemon at libre-soc.org
Wed Nov 4 01:42:48 GMT 2020


https://bugs.libre-soc.org/show_bug.cgi?id=517

--- Comment #49 from Cole Poirier <colepoirier at gmail.com> ---
(In reply to Luke Kenneth Casson Leighton from comment #48)
> cole check the wires into the STLinkV2 compared to where the "slot" is,
> you'll find you have the connector rotated 180 degrees

Fixed. Changed it from one image to two, one in the same orientation as the
JTAG pinout documentation, and one the opposite orientation (the same
orientation as the "ST" text on the STLINKV2) so that one can make sure the
jumper connections are correct if trying to use the STLINKV2 in the easier to
use orientation of the "ST" text being right-side-up with the micro usb port at
the bottom of the device.

-- 
You are receiving this mail because:
You are on the CC list for the bug.


More information about the libre-soc-bugs mailing list