[Libre-soc-dev] arctic tern twin FPGA modules into talos2 server

[Timothy Pearson]

----- Original Message -----
> From: "Jacob Lifshay" <programmerjake at gmail.com>
> To: "Timothy Pearson" <tpearson at raptorengineering.com>
> Cc: "luke leighton" <luke.leighton at gmail.com>, "Libre-Soc General Development" <libre-soc-dev at lists.libre-soc.org>
> Sent: Friday, June 17, 2022 2:41:50 PM
> Subject: Re: [Libre-soc-dev] arctic tern twin FPGA modules into talos2 server

> On Fri, Jun 17, 2022, 12:28 Timothy Pearson <tpearson at raptorengineering.com>
> wrote:
> 
>>
>>
>> ----- Original Message -----
>> > From: "Jacob Lifshay" <programmerjake at gmail.com>
>> > To: "luke leighton" <luke.leighton at gmail.com>
>> > Cc: "Timothy Pearson" <tpearson at raptorengineering.com>, "Libre-Soc
>> General Development"
>> > <libre-soc-dev at lists.libre-soc.org>
>> > Sent: Thursday, June 9, 2022 12:13:05 AM
>> > Subject: Re: [Libre-soc-dev] arctic tern twin FPGA modules into talos2
>> server
>>
>> > On Thu, Jun 2, 2022 at 12:39 PM lkcl <luke.leighton at gmail.com> wrote:
>> >>
>> >> yes we got the MoU signed on the other NLnet grant so jacob can put in
>> an RFP
>> >> without the contingency of the BTC. jacob can i recommend putting the
>> RFP in
>> >> very soon so it comes through in good time? including a sub-bug to
>> refund the
>> >> FPGA equipment you paid for 8 weeks ago. you know your finances
>> schedule due
>> >> dates, so the decision is down to you, don't run out of contingency in
>> other
>> >> words.
>> >
>> > I created the bug for refunding the fpga fund, lkcl, can you double
>> check it?
>> > https://bugs.libre-soc.org/show_bug.cgi?id=848
>> >
>> > Thanks,
>> > Jacob
>>
>> Just a quick ping to see if this was still something you wanted to do?  As
>> a heads up, prices are scheduled to increase the first of July due to
>> continued inflationary pressures.
>>
> 
> Ok, I'll submit a RFP to nlnet either today, sunday, or monday so we have
> the money to pay you. nlnet will send me the money in around a week or two.
> sorry for taking soo long.
> 
> Jacob

No worries, just wanted to make sure we could get this installed.

Thanks!