[Libre-soc-bugs] [Bug 746] I2C needs an Open Drain IO Pad

[bugzilla-daemon at libre-soc.org]

https://bugs.libre-soc.org/show_bug.cgi?id=746

--- Comment #8 from Staf Verhaegen <staf at fibraservi.eu> ---

> This should not be needed, your I2C master should already make sure oe=0
> when wanting 1 on output and oe=1 + o=0 when wanting 0 on output.

What I have seen is an I2C controller that puts always 0 on o and then control
the output by only enabling or disabling oe.

-- 
You are receiving this mail because:
You are on the CC list for the bug.