[Libre-soc-bugs] [Bug 746] I2C needs an Open Drain IO Pad

[bugzilla-daemon at libre-soc.org]

https://bugs.libre-soc.org/show_bug.cgi?id=746

--- Comment #3 from Staf Verhaegen <staf at fibraservi.eu> ---
I don't see the problem. IC controller will deliver i, o, oe signals; if you
want to MUX it with a signal that is only output you need to mux 1 on oe. If
you want to mux it with only input signal you need to mux 0 on oe pin.

-- 
You are receiving this mail because:
You are on the CC list for the bug.