[Libre-soc-bugs] [Bug 633] custom run of ulx3s with 85k LUTs 5G part, and 128 mbyte (1 gigabit) SDRAM

[bugzilla-daemon at libre-soc.org]

https://bugs.libre-soc.org/show_bug.cgi?id=633

Staf Verhaegen <staf at fibraservi.eu> changed:

           What    |Removed                     |Added
----------------------------------------------------------------------------
                 CC|                            |staf at fibraservi.eu

--- Comment #7 from Staf Verhaegen <staf at fibraservi.eu> ---
With current chip crunch and part lead times I'm not sure thinking about own
custom PCB is a good idea; especially if it is time critical.
There is a 85F version of ULX3S available on crowdsupply:
https://www.crowdsupply.com/radiona/ulx3s
If speed is really important maybe better to think about Intel/Xilinx FPGA
anyway. For example Trenz Electronics has a whole bunch of them:
https://shop.trenz-electronic.de/en/Products/Trenz-Electronic/
They also do custom modification to boards or your own design (like the MEGA65
prototype).

-- 
You are receiving this mail because:
You are on the CC list for the bug.