[Libre-soc-bugs] [Bug 517] Define JTAG pins and set up with litex for ulx3s85f

bugzilla-daemon at libre-soc.org bugzilla-daemon at libre-soc.org
Mon Apr 5 04:32:22 BST 2021


--- Comment #80 from Cole Poirier <colepoirier at gmail.com> ---

"5 OpenOCD Project Setup

To use OpenOCD with your development projects, you need to do more than just
connect the JTAG adapter hardware (dongle) to your development board and start
the OpenOCD server. You also need to configure your OpenOCD server so that it
knows about your adapter and board, and helps your work. You may also want to
connect OpenOCD to GDB, possibly using Eclipse or some other GUI."

You are receiving this mail because:
You are on the CC list for the bug.

More information about the libre-soc-bugs mailing list