[Libre-soc-bugs] [Bug 526] create dry-run 180nm GDS-II files for IMEC

bugzilla-daemon at libre-soc.org bugzilla-daemon at libre-soc.org
Thu Nov 12 17:28:30 GMT 2020


--- Comment #16 from Cole Poirier <colepoirier at gmail.com> ---
Created attachment 115
  --> https://bugs.libre-soc.org/attachment.cgi?id=115&action=edit
Complete log of `make lvx` output in experiments9

Hi JP, I'm not sure if my output will be the same as Luke's, but in my case it
fails because a pad is out of range of the "vdd" horizontal rail.

 Connect pad contact <id:8084 Pin vss METAL3 [210.L 0.L] 403.L x 4.L vss.2
    HORIZONTAL rail.
    railRange:[2, 3, 4, 5, 6, 7]
    Connect to [-2] @598.L
    Try to connect to: <HorizontalRail "vdd" (2) @598.L>

 [ERROR] <id:8084 Pin vss METAL3 [210.L 0.L] 403.L x 4.L vss.2 SOUTH> is
outside rail/corona X range,
         power pad is likely to be to far off west or east.
         (core:<Box 714.L 694.L 15726.L 15706.L>)

You are receiving this mail because:
You are on the CC list for the bug.

More information about the libre-soc-bugs mailing list